BYNXL - 226-00360,1MT188 H KOCH ACTUATOR
- MSDS: BYNXL
- Manufacturer: ICI AMERICAS INC AEROSPACE DIV
- Product Name: 226-00360,1MT188 H KOCH ACTUATOR
- National Stock Number: 1377-00-125-0074
Product Identification
Product ID:226-00360,1MT188 H KOCH ACTUATOR
MSDS Date:03/21/1989
FSC:1377
NIIN:00-125-0074
MSDS Number: BYNXL
Responsible Party
VALLEY FORGE, PA 19482-5000
US
Emergency Phone: 215-666-8666/215-666-8771
Info Phone: 215-666-8771/215-666-8666
Cage: ICIAM
Contractor
Telephone: 800-327-8633
Cage: ICIAM
Ingredients
BARIUM/CHROMATE/ZIRCONIUM BASED DELAY MIX
OSHA PEL 0.1 MG/CUM
ACGIH TLV: 0.05 MG/CUM
CHROMIUM COMPOUNDS (TYPE NOT SPECIFIED)
OSHA PEL 0.1 MG/CUM
ACGIH TLV: 0.05 MG/CUM
LEAD BASED FUEL/OXIDIZER
OSHA PEL 0.05 MG/CUM
ACGIH TLV: 0.15 MG/CUM
LEAD COMPOUND
BORON/BARIUM BASED OUTPUT CHARGE
OSHA PEL 0.5 MG/CUM
ACGIH TLV: 0.5 MG/CUM
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:CONTACT W/UNIT AT TIME OF FUNCTION
COULD CAUSE A PUNCTURE, BURNS & LACERATIONS.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:CONTACT W/UNIT AT TIME OF FUNCTION COULD CAUSE
A PUNCTURE, BURNS & LACERATIONS.
First Aid
First Aid:OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Unusual Fire/Explosion Hazard:THIS DEVICE COULD ACTUATE AT A TEMP OF
300F & ABOVE. PISTONS/PLUGS COULD BE A MISSLE HAZARD.
Accidental Release
Spill Release Procedures:REPACKAGE DEVICES. REUSE PACKING MATERIAL.
Handling
Handling and Storage Precautions:STORE AS RECEIVED IN A SECURE, DRY
AREA. HANDLE W/PROTECTIVE EQUIPMENT.
Exposure Controls
Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST: REQUIRED FOR FUNCTION TESTING. USE
BARRICADES.
Protective Gloves:NOT REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:USE BARRICADES FOR ELECTRICAL TESTING, LEAD
SOLDERING & FUNCTIONAL TESTING.
Supplemental Safety and Health
Chemical Properties
Appearance and Odor:METAL CYLINDER 0.5" DIAMETER X 2.3" LONG.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FLAME, TEMPS >160F, STATIC ELECTRICITY,
ELECTRICAL ENERGY, HAMMERING, DISMANTLING, POWER SOURCES, HEAT,
IMPACT.
Conditions to Avoid Polymerization:ROUGH HANDLING.
Disposal
Waste Disposal Methods:DISPOSE OF BY METHODS APPROVED FOR
PYROTECHNICALLY FUNCTIONED DEVICES IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.